Wireless alarm control panel with touch interface
according to guidelines: VdS Home, EN 50131 Grade 2
Area of application: commercial properties, house, apartment
Operation: Secvest Key, via RFID chip/card, via control panel, web server, via app, wAppLoxx cylinder
Radio zones: 48
Wire zones: 2x CC or 4x FSL
Users: 50
IP cameras: 6
Notifications:...
XEVOX motion detector ECO, BW8000, The Xevox Eco motion detector is a passive infrared motion detector with a PIR sensor. It reacts to any type of heat movement and reports this to the alarm center.
Radio range without obstacles up to 1200m
Battery life up to 7 years
Connection for an external sensor
Radio communication encrypted
Integrated temperature sensor
used device!
Application area: Apartment, house, business
Operation: via web server, via app
Max. number of sensors: 160
Max. number of users: 50
Max. number of integrated IP cameras: 15
Notifications: via emergency call center, via email, via app push message
with GSM module: Yes, LTE (4G)
CO2, temperature and humidity meter, ZWave
CO2 concentration of 400 to 5000 ppm
humidity from 30% to 85%
Temperature measurement: from 0°C to 45°C
Power supply: 12V AC power supply
Dimensions: 105.4 x 90.5 x 91.9 mm
The Grandstream UCM6104 IP PBX is designed to bring voice, video, data and mobility features typically found only in enterprise-grade systems to small and medium-sized businesses (SMBs).
The BUS signal output module JA-111N for PG outputs has a switching relay (1 A) with NO or NC setting. The respective PG output can be set using the DIP switch (switches one of the PG outputs 1–32).
As soon as a detector in your building triggers an alarm, your Jablotron 100 system knows the current status. With the PSTN expansion module, this information is passed on to you and to a possible alarm receiving center.
This module is intended for installation in a motor vehicle for the purpose of operating various devices (e.g. opening the garage door, parking barriers, etc.).
The wireless power relay module JA-150N (16 A/250 V AC) copies the state of the selected PG output (PG 1 to PG 32). The specific PG output is assigned an address in the module using the DIP switches allocated.
The wireless signal module JA-151N (2 A/60 V) copies the state of the selected PG output (PG 1 to PG 32). The specific PG output is assigned an address in the module using DIP switches.
The JA-150A wireless indoor siren is designed to provide sound indication of an alarm, entry and exit delays, and other activations of the home alarm system.
The JA-84P allows you to detect movements in the monitored room and visually confirm the alarm . The detector's camera has a flash and additional infrared lighting for night shots.
DIN rail power supply in robust housing with a
Installation depth of 56mm. The device has a
Wide range input of 85-265V/AC. The output voltage can be from
24-28V/DC can be set.
Our website uses cookies.
Further information can be found here: Privacy Plicy
