Relay module including housing for gas/water regulators, sprinklers, pool covers, and much more.
Integrated ZWave Repeater
OTA firmware update possible
Rated load max. 10A
Power supply: 110-230V AC
Dimensions: 86 x 72 x 29 mm
The Climax Vesta flush-mounted relay is used to activate and deactivate third-party devices (smart home functions). For example, you can connect lamps and configure them so that the relay is activated when an alarm is triggered / time or temperature controlled. It is also possible to activate the relay remotely, for example with your smartphone.
The LUPUSEC temperature sensor with display for the XT2 PLUS measures the temperature and humidity at the installation location and sends every temperature change every 2 minutes directly to the control center. This means you can check the temperature at the installation location of the sensor at any time, even when you are on the move.
The LUPUSEC light sensor reports the brightness value at the installation location to the control center. Using this information, you can create brightness-related automations, such as automatically opening the shutters during the day or extending the blinds when the sun is too bright.
The ZigBee Mini temperature sensor measures the temperature at the installation location and sends every temperature change every 10 minutes directly to the control center. This means you can check the temperature at the installation location of the sensor at any time, even when you are on the move.
The Climax VESTA radiator thermostat enables intelligent control of your heating via the VESTA alarm control unit. With the help of easy-to-create schedules, you can regulate the room temperature and adapt the heating phases to your individual needs.
Whether blinds, roller shutters or awnings - with the roller shutter relay from LUPUS-Electronics you can easily control them manually via your mobile phone, tablet, computer or fully automatically when entering or leaving the house, depending on the time, brightness, temperature or even the old-fashioned way with your existing switch on the wall.
The LUPUSEC temperature sensor with display for the XT2 PLUS measures the temperature and humidity at the installation location and sends every temperature change every 2 minutes directly to the control center. This means you can check the temperature at the installation location of the sensor at any time, even when you are on the move.
The clever switching assistant for your home: The Climax VESTA scenario switch is a wireless switch with 4 touch controls for the wall. This can either be glued or screwed. Wiring is not necessary. Once connected to the control center, you can trigger a total of 4 scenarios. A scenario in turn consists of a maximum of 5 automation rules.
The LUPUSEC universal IR remote control is set up and controlled via the LUPUSEC alarm control panel. By teaching existing remote controls, you can, for example, automate your air conditioning, fan or garage doors and control them while you are on the go.
Turn on the coffee machine in the morning before you get up. In the evening, have your home lit up for safety, even when you're not at home: With the Climax VESTA wireless socket, electrical devices such as lamps, coffee machines or radios can be easily integrated into your home control system.
The Climax VESTA temperature sensor measures the temperature and humidity at the installation location and sends every temperature change every 2 minutes directly to the control center. This means you can check the temperature at the installation location of the sensor at any time, even when you are on the move.
Our website uses cookies.
Further information can be found here: Privacy Plicy
