12 V thermal differential detector (wired)
12 V thermal differential detector (wired), RM1100, detectors / accessories
12 V thermal differential detector (wired)
The thermal differential detector detects emerging fires and fires. It reacts to a maximum temperature and a temperature increase. These indicators are reliably detected and reported to the alarm center.
The thermal differential detector is mounted on the ceiling in the middle of the room. The minimum distance to the side wall is 30cm. Since the thermal differential detector does not detect smoke, unlike optical smoke detectors, it is mainly used in places with high levels of dust and smoke (kitchens, smoking rooms, garages). The detector only triggers an alarm when a maximum temperature of 60 degrees Celsius is exceeded or the temperature rises by more than 5 degrees Celsius within 3 minutes. By adjusting a jumper, you can configure it as a NO or NC detector. This means it fits any wired alarm system. The thermal differential detector is supplied externally with 12V operating voltage and is EN54 certified.
Product Highlights:
For connection to alarm systems |
Detects temperature changes: 3°C within one minute |
Detected maximum temperature: 60°C |
Can be used in damp rooms |
Technical data:
Detector type | Thermal differential (3°C/minute), maximum temperature (60°C) |
Alarm contact | NO or NC, 1A @30VDC |
Connection | NC + 12V operating voltage |
Operating voltage | 10.5 - 13.8VDC |
Power consumption, standby | 55?A |
Power consumption, alarm | 50mA |
Start time | 60s |
Starting current consumption | 500?A |
Reset voltage | < 1V |
Reset time | < 1s |
operating temperatur | -10 to 50°C |
humidity | 0 - 95%, non-condensing |
Dimensions (HxØ) | 46x100mm |
Weight | 160g |
Details about 12 V thermal differential detector (wired)
Manufacurer:
Weight:
Recommended accesories for 12 V thermal differential detector (wired)
Reviews for 12 V thermal differential detector (wired)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Do you have any questions about 12 V thermal differential detector (wired)- Contact our experts
Benjamin M. Tanner – Managing Director and Security Expert
Do you need individual advice for your project? Do you have any questions about products, project planning or installation? As a managing director with over 18 years of experience in the field of security technology, I would be happy to help you and answer your personal concerns.
- Personal advice
- Trained Expert
- Fast Reply
- 20 years of experience