The AJAX HUB 2 LTE controls all Ajax devices and is therefore the heart of the system. In addition, the AJAX HUB 2 LTE is the only control center that is compatible with the MotionCam motion detector. In the event of an alarm, the motion detector with image recording function sends the corresponding images to the app and, if connected, the alarm to the security company.
The AJAX HUB 2 LTE uses Ethernet or one of the two SIM cards for guaranteed transmission of alarms and photos from the monitored objects. The channels work in parallel and back each other up in case of emergency.
The compression and transmission protocols guarantee lightning-fast transmission of photo series even with a weak Internet connection. Unlike video camera streams, with Ajax you can be sure that monitored objects are safe even with an Internet speed of 0.5 kB/s.
|
Transmits images from the motion detector "MotionCam" and only via the 2G network |
If requested, automatically informs a security company within 0.15 seconds. |
Communication via 3 independent channels. Full system control via the app. |
HUB 2 LTE controls all Ajax devices to alert users to open doors, broken windows, fire hazards, as well as floods. If burglars break into your home, HUB 2 LTE transmits the images from the MotionCam detectors and notifies the security company about the danger. You will never have to live under the constant surveillance of security cameras to know what is going on.
The device uses Jeweller's wireless technology (AES Encrypted) to monitor the detectors and ensure a quick response to threats. It switches the entire system to cancel the frequencies in the event of signal interference. The device is protected against viruses at the software level.
HUB 2 LTE runs on the real-time operating system OS Malevich. Software of this type is used in systems that must function without errors - such as spaceships, rocket launchers or car brakes.
OS Malevich is not only immune to viruses, but also protected against cyberattacks. The architecture of the operating system allows us to constantly expand the capabilities of Ajax wireless transmission without affecting users.
Ready to use straight away. Setup is done via the mobile application and the detectors are connected with a single click. With the SmartBracket mount it can be installed in just a few minutes.
Installing Hub 2 takes just a few minutes. Connect to the Internet and plug in the power cable. Then scan the QR code with the Ajax app. In most cases, your devices do not need to be configured additionally. HUB 2 LTE works as soon as the system is online.
Increase the potential of your security system with Ajax Scenarios to actively counteract detected threats and automate your routines. Set up a night mode activation on schedule; automatically turn off all office lights by arming the system; program street lights to illuminate intruders when they trigger an outdoor motion detector; or install a sustainable flood protection system. The system runs scenarios even if the connection to the Ajax Cloud Server is lost.
The AJAX HUBs - A brief overview:
| HUB | HUB2 | HUB 2 LTE | HUBPLUS | HUB 2 PLUS | |
|---|---|---|---|---|---|
| Devices | 100 | 100 | 100 | 150 | 200 |
| Cameras and DVRs | 10 | 25 | 25 | 50 | 100 |
| ReX | 1 | 5 | 5 | 5 | 5 |
| user | 50 | 50 | 50 | 99 | 200 |
| Security areas | 9 | 9 | 9 | 25 | 25 |
| Scenarios 1 | 5 | 32 | 32 | 64 | 64 |
| Support photo confirmation of alarms | No | YES | Yes (MotionCAM & MotionCAM Outdoor) | No | YES (MotionCAM & MotionCAM Outdoor) |
| Communication channels | 2G 1xSIM Ethernet |
2G 2хSIM Ethernet |
2G, 3G & 4G LTE 2хSIM Ethernet |
2G&3G ( 2xSIM) |
2G, 3G & 4G LTE (2хSIM) Ethernet Wi-Fi |
| Model | AJAX HUB 2 LTE, White |
| Maximum number of connected devices | 100 |
| Maximum number of groups | 9 |
| Maximum number of users | 50 |
| Number of connectable ReX (repeaters) | 5 |
| Number of scenarios | 32 |
| Sabotage contact | Yes |
| Frequency band | 868.0-868.6MHz |
| Effective radiant power | 8.20 dBm / 6.60 mW (limit 25 mW) |
| modulation | GFSK |
| Radio signal | Up to 2,000 m (open field) |
| Radio technology Jeweller | Radio range detector up to 2000m in open environments Two-way communication between devices Operating frequencies – 868.0–868.6 MHz Self-adjusting RF output power – up to 25 mW Block encryption based on the AES algorithm Detector query time – 12–300 seconds frequency jump More information about Jeweller >>> |
| Supports motion detector "MotionCam" | YES |
| Max. Video Cameras/DVRs | 25 More information >>> |
| Mobile APP (compatibility) | Android 4.1 or higher iOS 9.1 or higher |
| Communication channels | 2x 2G (GSM900/DCS1800) 1x Ethernet |
| Switching between 2G and 3G | - |
| Switching between SIM1 and SIM2 | 4 minutes |
| Communication with the control center | Contact ID, SIA |
| Alarm notification | SMS, call, push notification |
| Power supply | 110 to 240 V Power consumption: 10Wh |
| battery pack | Li-Ion 2 Ah (up to 16 hours of autonomous operation*) |
| processor | POOR |
| operating system | OS Malevich More information about firmware updates >>> |
| Operating temperature range | From -10 °C to 40 °C |
| Overall dimensions | 163x163x36mm |
| Weight | 362g |
Manufacurer:
Weight:
Benjamin M. Tanner – Managing Director and Security Expert
Do you need individual advice for your project? Do you have any questions about products, project planning or installation? As a managing director with over 18 years of experience in the field of security technology, I would be happy to help you and answer your personal concerns.
