The intelligent hub central unit is the heart of the Ajax security system.
This AJAX starter package consists of:
Second generation intelligent control panel , a new powerful processor, triple RAM capacity and double flash memory. The AJAX HUB 2 PLUS monitors the operation of all Ajax detectors and immediately notifies the owner and security service if necessary.
The compression and transmission protocols guarantee lightning-fast transmission of photo series even with a weak Internet connection. Unlike video camera streams, with Ajax you can be sure that monitored objects are safe even with an Internet speed of 0.5 kB/s.
|
It uses GSM or Ethernet to send alarms to the monitoring center and the owner |
The device sends a notification in case of power failure and works up to 15 hours on the battery reserve |
It checks the functionality of the detectors at least every 12 seconds |
The device records information about the detector operation in an encrypted format, analyzes the data, and in the event of an alarm, notifies the system owner and the monitoring center in just a few milliseconds.
The device uses Jeweller's wireless technology to monitor the detectors and ensure a quick response to threats. It switches the entire system to cancel frequencies in the event of signal interference. The device is protected against viruses at the software level.
Ready to use straight away. Setup is done via the mobile application and the detectors are connected with a single click. With the SmartBracket mount it can be installed in just a few minutes.
The AJAX HUBs - A brief overview:
| HUB | HUB2 | HUBPLUS | HUB 2 PLUS | |
|---|---|---|---|---|
| Devices | 100 | 100 | 150 | 200 |
| Cameras and DVRs | 10 | 25 | 50 | 100 |
| ReX | 1 | 5 | 5 | 5 |
| user | 50 | 50 | 99 | 200 |
| Security areas | 9 | 9 | 25 | 25 |
| Scenarios 1 | 5 | 32 | 64 | 64 |
| Support photo confirmation of alarms | No | Yes (MotionCAM) | No | YES (MotionCAM) |
| Communication channels | 2G 1xSIM Ethernet |
2G 2хSIM Ethernet |
2G&3G |
2G, 3G & 4G LTE ( 2хSIM) Ethernet Wi-Fi |
| Model | AJAX HUB 2 PLUS |
| Maximum number of connected devices | 200 |
| Maximum number of groups | 25 |
| Maximum number of HUB users | 200 |
| Number of connectable ReX | 5 |
| Number of scenarios | 64 |
| Sabotage contact | Yes |
| Frequency band | 868.0-868.6MHz |
| Effective radiant power | 8.20 dBm / 6.60 mW (limit 25 mW) |
| modulation | GFSK |
| Radio signal | Up to 2,000 m (open field) |
| Max. Video Cameras/DVRs | 100 |
| Mobile APP (compatibility) | Android 4.1 or higher iOS 9.1 or higher |
| Communication channels |
2G (GSM900/DCS1800) |
| Switching between 2G and 3G | immediately |
| Switching between SIM1 and SIM2 | 4 minutes |
| Communication with the control center | Contact ID, SIA |
| Alarm notification | SMS, call, push notification |
| Power supply | 110 to 240 V Power consumption: 10Wh |
| battery pack | Li-Ion 2 Ah (up to 16 hours of autonomous operation*) |
| processor | POOR |
| operating system | OS Malevich |
| Operating temperature range | From -10 °C to 40 °C |
| Overall dimensions | 163x163x36mm |
| Weight | 350g |
Manufacurer:
Weight:
Benjamin M. Tanner – Managing Director and Security Expert
Do you need individual advice for your project? Do you have any questions about products, project planning or installation? As a managing director with over 18 years of experience in the field of security technology, I would be happy to help you and answer your personal concerns.
