Shopping Cart 0.00

Turn key tone (click tone) on/off | Adjust operating, information and alarm tones | Language volume | Message volume
# Secvest Touch wireless alarm system (FUAA50500)

Reading time: approx. 2 minutes

As an administrator , you can determine whether and how loudly the Secvest provides acoustic feedback:

when using the local user interface .
for information, e.g. if there is a fault.
in case of alarm.

In addition, you determine:

the “Language Volume” for e.g. the message “Please note the information in the display”.
at what volume the alarm center plays spoken messages to users = “Message Volume”.

As a normal user , you can determine whether a quiet “click sound” (= key sound) should be heard each time the keys are touched.

requirements

In order to adjust the volume of the Secvest, the following requirements must be met:

The Secvest has been put into operation .
The code (and optionally: the user name for the web interface) of an administrator .

To activate or deactivate the Secvest key tone, the following requirements must be met:

The Secvest has been put into operation.
The code (and optionally: the user name for the web interface) of a normal user .

Key tone (“click tone”)

Log in as a normal user or administrator , e.g. using the Secvest local user interface .
Go to the path (Advanced) User Menu > System Configuration > Features On/Off > Key Tones by navigating there with the arrow keys and the confirmation keys .
Select “Off” to deactivate the “click sound” (= key sound).

volume

Log in as administrator, e.g. using the Secvest local user interface.
Go to the path Advanced User Menu > Configuration > Volume Settings by navigating with the arrow keys and the confirmation keys.

The numbers 0-9 indicate the volume of the corresponding tones, where 0 means silent and 9 means maximum volume.