Ubiquiti UniFi Mobile Router Industrial &bull Cat 4&bull WiFi &bull GPS &bull PoE &bull UMR-Industrial
Ubiquiti UniFi Mobile Router Industrial &bull Cat 4&bull WiFi &bull GPS &bull PoE &bull UMR-Industrial
Site-to-site VPN and VPN client routing
(2) GbE ports with (1) PoE output*
Power supply via PoE, USB Type-C or 4-pin DC power jack
GPS outdoor location tracking
Flexible wall, mast and DIN rail mounting
Weatherproof (outdoors) with the included cover
Optional Mobility Cloud subscription**
*PoE+ input required for PoE passthrough.
**Provides secure remote access and full management via the UniFi Mobility
Mechanically | |
---|---|
Mass | Without outdoor cover: 114.5 x 93.6 x 32 mm (4.5 x 3.7 x 1.3") With outdoor cover: 217 x 94 x 32 mm (8.5 x 3.7 x 1.3") |
Weight | Device: 360 g (12.7 oz) Device with outer cover: 395 g (13.9 oz) DIN rail/wall mounts: 25 g (0.9 oz) |
housing material | polycarbonate, aluminum |
mounting material | Wall/mast mounting: Polycarbonate DIN rail mounting: Polycarbonate |
diameter of the mast mount | 1–2" on the pipe outer diameter |
wind load | 38.8 N at 200 km/h (8.7 lbf at 125 mph) |
weather resistance | Device with outdoor cover: IP66 |
Hardware | |
management interface | Ethernet WiFi |
network interface | (2) GbE RJ45 ports LTE Category 4 radio WiFi 4 |
PoE interface | (1) PoE input (1) PoE output* (Max. 10 W) *Requires a PoE+ switch. |
power supply | UniFi PoE Switch (48-54V DC) USB Type-C (5 V DC) 4-pin* ATX DC power jack (9-30 V DC) *Pin 1 for power + and pin 2 for ground -. A detailed pin assignment of the power jack can be found in the installation manual . |
Max. power consumption | 12.5 W |
SIM | Nano-SIM (4FF) |
LTE bands | B1, B3, B7, B8, B20, B28 |
3G bands | B1, B8 |
LTE throughput speed* | Download 150 Mbit/s / Upload 50 Mbit/s *Speed depends on network coverage and performance at device location. |
WLAN standards | 802.11 b/g/n, Wi-Fi 2.4G, 20/40 MHz |
Max. WLAN transmission power | 22 dBm |
WLAN MIMO | 2 x 2 |
GPS | Yes |
antenna SMA connectors | (1) Mobile 1: SMA female, supports 1Tx and 1Rx (1) Mobile 2: SMA socket, only supports 1Rx (1) GPS: SMA socket (2) WLAN: RP-SMA sockets Note: Make sure all SMA/RP-SMA connectors are secured with antennas or the included caps to ensure weatherproofing. |
External antennas | (2) Mobile/LTE antennas with SMA connector (1) GPS antenna with SMA connector (2) WiFi antennas with RP-SMA connector |
LED | Status: blue/white |
button | factory reset |
assembly | DIN rail/wall/mast mount (included) |
ambient temperature during operation | -40 to 70 °C (-40 to 158 °F) |
humidity during operation | 5 to 95% non-condensing |
certifications | CE, GCF, Wi-Fi Alliance® |
Supported WiFi data rates | |
802.11b | 1, 2, 5.5, 11 Mbit/s |
802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
802.11n (WLAN 4) | 6.5 Mbit/s to 300 Mbit/s (MCS0 – MCS7, HT 20/40) |
Details about Ubiquiti UniFi Mobile Router Industrial &bull Cat 4&bull WiFi &bull GPS &bull PoE &bull UMR-Industrial
Manufacurer:
Weight:
Recommended accesories for Ubiquiti UniFi Mobile Router Industrial &bull Cat 4&bull WiFi &bull GPS &bull PoE &bull UMR-Industrial
Reviews for Ubiquiti UniFi Mobile Router Industrial &bull Cat 4&bull WiFi &bull GPS &bull PoE &bull UMR-Industrial
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Do you have any questions about Ubiquiti UniFi Mobile Router Industrial &bull Cat 4&bull WiFi &bull GPS &bull PoE &bull UMR-Industrial- Contact our experts
Benjamin M. Tanner – Managing Director and Security Expert
Do you need individual advice for your project? Do you have any questions about products, project planning or installation? As a managing director with over 18 years of experience in the field of security technology, I would be happy to help you and answer your personal concerns.
- Personal advice
- Trained Expert
- Fast Reply
- 20 years of experience