HikVision - Wireless water detector

The wireless water detector (DS-PDWL-E-WE) is a component of the HikVision AX PRO.

The water detector from HikVision reliably alerts you to water damage or flooding. To do this, simply place the water detector on the floor (e.g. near the washing machine). Alternatively, you can connect an external sensor via cable and attach it so that only this has contact with the floor. The detector itself can therefore also be mounted on the wall. Every contact with water activates a siren built into the detector and transmits an alarm to the control center.

The water detector is also battery-operated and is connected to the alarm system wirelessly. It can therefore be installed near the floor in any room. Cables for signal transmission or a power supply via a power pack are NOT necessary. Simply connect the water detector to the alarm system via the control panel and set it up.

Product Highlights:

• Waterproof design for multi-purpose applications
• Fully remotely configurable via app
• Multiple registration method and simple installation design
• Frequency hopping for interference-free transmission
• Multiple learning methods and simple installation design

Technical data:

• Tamper protection: front, rear
• Ambient temperature display
• Signal strength indicator
• LED indicator: Blue (alarm)
• Transmission technology: Tri-X Wireless
• Transmission method: Two-way RF radio
• Transmission frequency: 868 MHz
• Transmission security: AES-128 encryption
• Transmission range (free space): 1.2 km
• Frequency jump
• Registration method: Power on, Remote ID, QR code
• Power supply: Battery operated
• Battery type: CR2450 x 1
• Voltage: 3V
• Standard battery life: 3 years
• Operating temperature: -10°C to 55°C
• IP rate: IP66
• Dimension: 62.4mm × 62.4mm × 14.6mm
• Weight: 85.5g
• Mounting method: wall, surface
• Application: Indoor

Scope of delivery:

• 1x HikVision - wireless water detector