IR illuminator - 850 nm, 30°, 100m
- Infrared range 100m
- Illumination by LEDs of 850 nM
- 6 SMT ceramic LED lamps
- Beam opening 30°
- Integrated light sensor
- Intensity continuously adjustable
- Twilight switch adjustable
IR illuminator - 850 nm, 30°, 100m
More light better pictures
In order for cameras to take clear pictures in the dark, they need (infrared) light. The semi-discrete IR illuminator L provides cameras with the necessary light even in absolute darkness. The IR LEDs provide infrared light for night shots with a wavelength of 850 nm. The IR illuminator is suitable for both black and white and day/night cameras.
Can also be used in extreme weather conditions
The range of the IR light emitter depends on the light sensitivity of the camera. At 0.1 lux, the range is around 100 meters. The beam angle is 30° (horizontal). The IR emitter is dustproof and protected against strong water jets (IP66). It can therefore be used outdoors at temperatures between -10°C and +50°C without any problems. Its maximum power consumption is 18 watts.
Automatic day/night switching semi-discrete LEDs
The IR emitter detects dusk or darkness using an integrated photo sensor and then switches on automatically. If the brightness is sufficient, e.g. from daylight, it switches off. The IR emitter L 850nm, 30° is a semi-discrete IR emitter.
The wavelength of this emitter is approximately 850 nm, which is slightly shorter than the wavelength (940 nm) of a discrete emitter of the same type. The advantage of the semi-discrete emitter is its greater range. The reddish shimmer of its LEDs can only be faintly seen in the immediate vicinity of the emitter.
Technical data:
LED | 12 |
wavelength | 850nm |
Opening angle | 30º |
Range | 100m |
Power supply | 12VDC/1500mA, 18W |
Degree of protection | IP66 |
Temp. Working principle | -10ºC ~ 50ºC |
Dimensions | 96 (L) x 151 (H) x60 (W) mm |
Weight | 1 kg |
Product Highlights:
Integrated light sensor for automatic switching on and off
Power supply input 12VDC
Semi-discreet for long ranges
Range up to 100 m
IP66 for indoor and outdoor use
Scope of delivery:
- 1 IR emitter
- 1 Instructions
Details about IR illuminator - 850 nm, 30°, 100m
Manufacurer:
Weight:
Recommended accesories for IR illuminator - 850 nm, 30°, 100m
Built-in power supply 12V 1A IP67
Built-in power supply 12V 1.5A IP67
Built-in power supply 12V 2A IP67
Camera power supply 12V 0.5A Black
Plug-in power supply, stabilized, 12V, 2A - black
Plug-in power supply 12v 1000mA, stabilized
Reviews for IR illuminator - 850 nm, 30°, 100m
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Do you have any questions about IR illuminator - 850 nm, 30°, 100m- Contact our experts
Benjamin M. Tanner – Managing Director and Security Expert
Do you need individual advice for your project? Do you have any questions about products, project planning or installation? As a managing director with over 18 years of experience in the field of security technology, I would be happy to help you and answer your personal concerns.
- Personal advice
- Trained Expert
- Fast Reply
- 20 years of experience