LUPUS - Vibration detector

The combined hazard detector of the LUPUSEC Smarthome alarm system

When installed on windows or doors, the LUPUSEC vibration detector stops burglars as soon as they attempt to break in. The vibration sensor, which has an adjustable sensitivity, detects attempts to force open windows and doors, which are typical for burglars, and alerts you before they break into your premises.

The detector has 2 setting modes, each with 3 sensitivities. When set to shock, a single shock is enough to trigger the alarm. With the vibration setting, several consecutive shocks are necessary, such as those that occur during an attempted break-in.

Quickly installed, reliably protected!

Insert the battery and stick it on the window or door frame - that's how quickly this sensor is installed. After you have added the detector to the control panel with the usual one-click solution, all you have to do is set the sensor type and sensitivity.

Once integrated into the system, the vibration detector reports every attempted break-in to the control center. This in turn then immediately informs you via the configured alarm channels (push notification, email, SMS or to the security center).

Product Highlights:

• Only compatible with: XT1 Plus, XT2, XT2 Plus, XT3, XT4
• Reliably detects attempted break-ins
• Small housing
• Is glued
• Radio transmission
• Status transfer
• approx. 2.6 years battery life
• Alert in case of alarm via the control center via SMS, (phone call), email and contact ID

Technical data:

• Dimensions: Ø 44.6mm x 16.3mm
• Weight: approx. 0.05 kg (including battery)
• Detection method: Vibration sensor
• Tamper monitoring: Yes
• Tamper indication of the sensor in the control panel: No
• Status monitoring and display by the control center: Yes
• Radio frequency: 868MHz
• Radio power: max. 10mW
• Transmission range: Approx. 30 to 100 meters (depending on local conditions)
• Communication method: FM
• Mounting options: glued
• Power supply: 1 x CR2477 3V lithium battery
• Average battery life: approx. 2.6 years
• Installation location: Window pane, window frame, door; Indoor use only
• Directive compliant: CE, FCC, RoHs
• Working temperatures: -10°C to 45°C
• Compatible with XT Central: XT1 Plus, XT2, XT2 Plus, XT3

Scope of delivery:

• 1x LUPUSEC - vibration detector
• CR2477 3V lithium battery
• 1x manual