LUPUS - Smoke detector V2

The LUPUSEC smoke detector is also completely set up and controlled via your LUPUSEC alarm system and reliably warns you at any time if smoke develops. The smoke detector is also battery-operated and is connected to the alarm system wirelessly. It can therefore be easily attached to any wall or ceiling of your choice. Cables for signal transmission or a power supply via a power pack are NOT necessary. Simply connect the smoke detector to the alarm system via the control panel and set it up.

Product Highlights:

• Compatible with Lupusec XT1, Lupusec XT2 and Lupusec XT2 PLUS, XT3 and XT4
• High-quality optical smoke detector
• Reports smoke development directly to the control center
• Small housing
• Internal acoustic alarm
• Radio transmission
• Status transfer
• EN 14604 compliant
• Alert in case of alarm via the control center via SMS, (phone call), email, acoustic, or contact ID

Technical data:

• Operating temperature: -10° to +45°
• Dimensions: 100 x 48mm (ØxH)
• Weight: 0.16kg
• Detection method: Optical
• Sensor type: photodiode
• Status display in the control center: Yes
• Status + battery indicator in the control center: Yes
• Radio frequency: 868.6625 MHz
• Radio power: max. 10mW
• Transmission range: Approx. 30 to 100 meters (depending on local conditions)
• Modulation: FM
• Mounting options: Screwing
• Power supply: 3 x AA lithium or alkaline battery
• Average battery life: 2.5 years
• Minimum sensor life: 10 years
• Installation location: Ceiling, Indoor only
• Signal generator: Internal acoustic piezo signal generator
• Volume of the internal siren: 95dB measured at 1m distance
• Monitoring area: approx. 60 sqm (with straight ceilings)
• Compatible with XT Central: XT1, XT1 Plus, XT2, XT2 Plus, XT3

Scope of delivery:

• 1x LUPUSEC - 12117 - Wireless smoke detector V2 for XT alarm systems
• 3x AA batteries
• 1x screws and dowels
• 1x mounting plate
• 1x manual