LUPUS - Wireless sensor input (9-way)

The LUPUS - wireless sensor input (9-way) has nine potential-free contacts for a total of 9 detection groups or individual detectors. If one of these detection lines is bridged (closed), e.g. by an existing wired door contact, a motion detector, a BUS system or similar, an alarm is triggered. Several detectors can also be connected to one detection line. In the WebUI of your control center, you can then assign a type (e.g. door contact or smoke detector ) to the detection line.

Product Highlights:

• Allows the connection of 9 external detectors
• Potential-free contacts
• Sabotage protection
• External power supply
• Integrated emergency battery

Technical data:

• Dimensions: 105 x 30 x 163 mm (LxWxH)
• Detection method: potential-free contact
• Resistance: 30 Ohm
• Tamper monitoring: Yes, dismantling contact
• Tamper indication of the sensor in the control panel: Yes
• Status monitoring and display by the control center: Yes
• Radio frequency: 868.6625 MHz
• Radio power: max. 10mW
• Transmission range: Approx. 30 to 100 meters (depending on local conditions)
• Modulation: FM
• Mounting options: Screwed, glued
• Power supply: 12V 1A power supply (not included) with emergency battery for approx. 72 hours
• Installation location: any, indoor only
• Compatible with XT Central: XT1 Plus, XT2, XT2 Plus, XT3

Scope of delivery:

• 1x LUPUSEC - 12125 - Wireless sensor input
• 1x screws and dowels
• 1x User manual