LUPUSEC - XT1 PLUS Starter Pack | The LUPUSEC - XT1 PLUS is a true marvel of user-friendliness and flexibility. The heart of this newly developed IP wireless alarm system is the wireless alarm control panel, which measures just 200 x 165 x 30mm and is easily connected to your router via a network cable.
This LUPUSEC XT1 PLUS wireless alarm system set consists of:
 |
LUPUS XT1 Plus. The professional smart home alarm system for everyone.This is the new LUPUS XT1 Plus. It offers you professional alarm protection, the largest smart home range on the market and the best integrated video surveillance solution. With the XT1 Plus you can use up to 80 alarm and smart home sensors. With the LUPUS door-window sensors and motion detectors, your house is protected 24 hours a day. And you are always informed via your smartphone about who is entering or leaving your house. You can even monitor this live via your smartphone using a video camera. There is also an optional connection to a 24-hour security service. This is real 24/7 protection. Even if your smartphone battery lets you down again, there is someone there to look after you. |
|
The new LUPUS XT1 Plus is not only an alarm system, but also a professional hazard detection system.Not just a burglary alarm, but a comprehensive hazard detection system: With sensors for smoke, heat, temperature, carbon monoxide and carbon dioxide, water, robberies and medical emergencies, your home is prepared for all dangers. Because all sensors are networked and notify you immediately when an alarm is triggered. This means that a fire can often be nipped in the bud even if you are not at home. Or deadly gas can be detected early on so that countermeasures can be taken in good time. |
||
Sensors report burglary alarm |
||
 |
||
Smoke detector reports smoke development |
||
 |
||
A water detector detects water damage |
||
 |
||
 |
||
A break-in attempt is reported |
||
 |
||
Save energy when leaving the house |
||
 |
||
Ultimately, a LUPUS XT1 Plus is also just practical. You can use it to control the whole apartment or the whole house. Who is the last one to leave turns off the lights? No problem anymore with the automatic light control of the XT1 Plus. With just one click, you can learn your networkable lamps from Philipps Hue, Osram lightify or IKEA and automate processes with ease, e.g. automatically switching off all lights when you leave the house. Of course, you can also directly connect this process to closing the shutters or lowering the radiator temperature.
And of course the XT1 Plus meets the highest standards of data security. Every connection to and from the XT1 Plus is secured with very high encryption at level 256bit TLS 1.2. The control panel and burglar alarms are also protected against sabotage from the outside and inside.
And yet everything is easy to install and use.
Product Highlights:
Technical data:
Technical data of the XT1 Plus control unit: |
|
| Dimensions | 200x165x30mm (WxHxD) |
| Weight | 0.51kg |
| Max. number of sensors | 80 (2 areas with 3 home modes) |
| Max. number of additional extensions | 8 (radio relay, repeater) |
| Max. number of PIR network cameras (also count as sensors) | 6 |
| Max. number of IP cameras | 4 |
| Sabotage protection of the control center | Yes, rear case |
| Sabotage display of the sensors in the control panel interface | Yes |
| Status display | Yes |
| Battery display of the sensors in the control panel interface | Yes |
| UPnP support | Yes |
| Internal storage of images | Yes, saves 3 images of a PIR network camera per alarm |
| FTP / Email image sending | Yes |
| Alarm options | Contact ID via TCP/IP (proprietary), SIA DC09, email, SMS, push notification |
| Radio frequency | 868.6625 MHz (Dual Way) and 2.4GHz (Dual Way) |
| Radio performance | max.10mW |
| Transmission range | Approx. 30 to 100 meters (depending on local conditions), extendable via repeater |
| modulation | FM |
| Mounting options | Wall |
| Power supply | 1100 mAh Ni-mh rechargeable emergency battery, 9V DC |
| Working temperatures | -10 to +45°C |
| Max. humidity | up to 90% (non-condensing) |
| Policy compliant | CE, RoHS |
| Features | Arm, Disarm, Home Mode, Silent Alarm, Fire, Gas, Medical Alarm, Check Panel Status, Alarm Signaling |
| Available additional components: | In total, we currently offer you over 30 alarm system components for a wide variety of applications. If you have any further questions, please do not hesitate to contact us. |
| Languages (web server, not APP) | German, French, English, Spanish, Italian |
| Internal siren | Yes |
| Remote access | via PC (web browser), MacOS (web browser), iPhone (mobile view), Android (LUPUSEC app) |
| Control centers/software that support connection to the XT1 | Alec Sicherheitssysteme GmbH, INSOCAM's AM/Win, Securitas, Sicherheit-Nord GmbH & Co KG, Bavaria Werkschutz GmbH, SecuConcept |
| Compliant with | EN50131 Grade 1 |
Scope of delivery:
Manufacurer:
Weight:
Benjamin M. Tanner – Managing Director and Security Expert
Do you need individual advice for your project? Do you have any questions about products, project planning or installation? As a managing director with over 18 years of experience in the field of security technology, I would be happy to help you and answer your personal concerns.
