AJAX - 8 MPx IP-Bullet Kamera, 4mm, 80°, Weiss

Wired IP surveillance camera with a resolution of up to 3840 × 2160 px and a viewing angle of 80°
BulletCam is an IP camera with intelligent infrared backlight and object detection. Users can view archived and online videos in Ajax applications. To save the captured data, install a microSD card or connect the camera to NVR using an installed hard drive.

The BulletCam is an IP camera that uses artificial intelligence (AI) for object detection. Its algorithms can detect moving objects and distinguish between people, animals or vehicles.

The device features an intelligent IR backlight that enables high-quality recording even in low-light conditions. The camera automatically adjusts the backlight intensity in real time to avoid overexposure, thereby enabling clear visibility of objects that are either too far away or too close to the camera in low-light conditions.

You can install a microSD card with a storage capacity of up to 256 GB (not included in the complete set of the camera). In addition, the device can operate without a memory card or via NVR.

BulletCam offers the following possibilities:

1. Watch the video in real time, with the ability to zoom in to enlarge.
2. Access to archived videos, with the ability to navigate through them based on a recording chronology and calendar (this feature is available when a microSD memory card is installed in the camera or the camera is connected to NVR via an installed hard drive).
3. Configure motion detection zones and adjust sensitivity levels.
4. Display the video wall which combines the images from all connected cameras.
5. Create video scenarios that send a short video from the selected camera to the Ajax app when a detector is triggered.

Video scenarios

The Ajax system provides the ability to use IP cameras for alarm verification. Video scenarios allow supporting alarm triggers with corresponding videos from cameras installed in the facility.

Cameras can be configured to respond to alarms from a single device, multiple devices, or all connected devices. Combined detectors can register multiple types of alarms, allowing you to configure responses to a variety of alarm types, whether it's just one, multiple, or all alarms.

Video wall

The user can manage videos on the Video Wall tab, which is accessible after adding at least one camera. This feature provides quick access to all connected cameras, which are displayed in accordance with the privacy settings.

The user can:

1. Switch between cameras.
2. Search for the desired camera by name.
3. Get updates for camera thumbnails.
4. Change the display order

Privacy settings

The user can configure access to view video from shared cameras and extend this ability to other users and the security company. The user can set the conditions for video viewing: anytime when shared devices are activated or only within a certain period of time after the alarm.

compatibility

• All hubs
• Video recorder NVR

Video stream

• Video protocol: JetSparrow, fast and encrypted peer-to-peer video protocol developed by Ajax Systems.
• Storage: NVR, microSD (storage media not included.)
• Codec: H.265/H.264
• Dynamic range: HDR/WDR

Communication channel

• Ethernet up to 100 Mbps

Key Features

• Motion detection: The camera has software to detect movements in the image.
• Object recognition by AI: people, pets, vehicles.
• Intelligent IR illumination: up to 35m, automatic intensity adjustment in real time to avoid overexposure. This allows objects that are far away or too close to you to be detected even in poor lighting conditions.
• Active Zone: The camera focuses on specific areas where the device detects motion.
• Visual verification of Ajax alarms: The system allows setting up a scenario in which Ajax detectors activate selected cameras to start recording. The result is immediately sent to the mobile or desktop app for monitoring.
• Microphone: With the right settings, the camera records the sound on site.

Power supply

• Power supply: 12 V⎓ ± 20%, 1 A, up to 7.5 W power consumption.
• Ethernet port: PoE standard 802.3at

Protection against sabotage

• mTLS: Encrypted connection to protect data.
• Authentication: via cloud, without local access rights.
• Secure Boot: Protection against firmware spoofing.
• OTA signature verification: Secure automatic firmware update.
• Data protection: Assign access rights for users in mobile apps and for monitoring personnel in PRO Desktop.

Housing

• Dimensions: 198 × 76 × 76mm
• Weight: 550g
• Operating temperature range: from −25 °C to +40 °C
• Operating humidity: up to 90%
• Protection class: IP65
• Scope of delivery: BulletCam (8 Mp/4 mm), installation template, mounting kit, quick start guide