Z-Wave™ Smart Switch, 1 channel 16 A

Control a wide variety of appliances and office equipment such as electric locks, gates, garage doors, irrigation systems, LED strips, lights and sockets from anywhere. The output contact is voltage-free (dry contact) so you can connect various power loads of up to 16A to the device.

1. Dry contact
2. Extremely low power consumption of the device: 0.3 W.
3. Latest technology: Z-Wave 800 series
4. Z-Wave frequency band: 868.4 MHz (CEPT countries)
5. Automatic setup with SmartStart
6. 2-factor authentication for the highest level of security
7. Supports over-the-air firmware updates (OTA)
8. Compatible with Z-Wave certified gateways and over 4,000 Z-Wave devices

A gateway (Smart Hub) is required to configure the device.
*A gateway (Smart Hub) is not included.

Shelly Qubino works with Z-Wave

By using Z-Wave, smart home products can communicate seamlessly with each other, regardless of their brand or platform, thanks to a centralized smart hub! Shelly Qubino devices work with the latest Z-Wave chip generation (S800), one of the most popular standardized technologies for smart homes worldwide.

Features

Z-Wave operated

Connect the Wave 1PM to your Z-Wave network and control it remotely. It is compatible with all certified Z-Wave gateways.

Assignments

Establish direct communication between devices on your local Z-Wave network and define custom actions without the need for a hub!

Dry contact

Connect various power loads (up to 16A) to the device.

Supports a wide range of voltages

Use a wide range of output voltages, even for low voltages.

Smart schedules

Create personalized schedules to match your daily routine or sync with sunrise and sunset to control your lights (gateway required).

Intelligent scenes

Set custom scenes by combining the Wave 1PM with other Z-Wave devices (gateway required).

APPLICATION EXAMPLE

Automate lighting and let it follow your schedule

Make any light switch smart with Shelly Wave 1 and control it from your phone or with a voice assistant. Use your hub's app to set automatic scenes based on an hour or sunset/sunrise. So you can set the porch light to turn on when you get home from work, or the hallway light to turn off when it's past your family's bedtime. And don't worry—light switches can still be operated manually to meet the needs of everyone in your home.

Set up associations and let your home welcome you

Configure Wave 1 and other devices in your Z-Wave network and create associations between them for direct communication without a gateway. Automate your door lock and lighting and set a rule: whenever the front door is unlocked, the lights in the lobby/hallway turn on.

Automate your irrigation system for effortless gardening

With an automatic irrigation system, you can effortlessly control your garden's watering with a tap of your smartphone, even when you're on vacation. Just set a schedule and the sprinklers will turn on and off automatically. Yes, it's that easy.

Control your garage door remotely

Did you close the garage door after leaving your house? From now on, you can easily check this with your smartphone. Wave 1 has operating voltages of 12 V DC and 24-48 V DC, making it perfect for controlling garage doors.

Technical data