Visonic PowerG Funk-Temperaturmelder

The Visonic PowerG temperature sensor measures the temperature at the installation location and sends any temperature change directly to the control panel. This means you can check the temperature at the sensor's installation location at any time, even when you are on the move.

The temperature sensor is battery-operated and is in radio contact with the alarm system within radio range. Cables for signal transmission or a power supply via a power pack are NOT necessary.

Product Highlights:

• Possible alarm triggers: warmer than -5°C (e.g. failure of the cold storage room), cooler than 10°C (imminent risk of frost), cooler than 18°C (e.g. heating failure) and warmer than 30°C (switching on the air conditioning)
• Additional visual alarm
• Optionally connectable external sensor enables monitoring of refrigerator, freezer and outside temperatures
• PowerG with 2-way FHSS (Frequency Hopping Spread Spectrum) and TDMA technology
• Optical display of signal quality on the device
• The message “Battery almost empty” is given visually and via radio signal
• Bracket for easy wall or ceiling mounting
• Tamper protection: opening and tear-off contact

Technical data:

• PowerG 2-way FHSS-TDMA (Frequency Hopping Spread Spectrum) technology
• Sensor operating temperature: -30°C to +70°C
• Length of sensor cable: 3.5 m
• Measurement accuracy: ~ 1.5°C
• Ambient temperature: -20°C to +50°C
• Dimensions (HxWxD): 92 x 36.5 x 31 mm
• Weight: 50g

Scope of delivery:

• Visonic PowerG wireless temperature detector